manualshive.com logo in svg

Hardy Diagnostics QuickSlide HemaPRO, User'S Operation Manual, Page: 24 / 33

Share
Download
Hardy Diagnostics QuickSlide HemaPRO User'S Operation Manual Download Page 24

 

 
IFU-10891[C] HemaPRO 

User 

Manual 

Page 24 of 33

 

 

 

  Unscrew the two (2) thumbscrews holding the front panel pump cover in place. 

This will expose the four pump tube rollers, the orange pump tubes, and the 
reagent/waste lines. 

 

 

 

NOTE:

 Please use the above diagram to assist you when replacing the 

tubes from the pump rollers. Notice that all “elbow” connection labeled as 
“

Shorter

” connect to the bottom of the cuvette.  

 

  Remove the orange pump tubes off of each roller so that they are hanging off 

of the roller, but still held inside of the black metal bracket. 

 

  Cut the four (4) zip-ties that are holding the clear tubing together. One (1) may 

be found between Pump #3 and Pump #4, and three (3) are located along the 
back of the instrument. 

 

Pump #1 

Rinse 

Pump #2 

Buffer

Pump #3 

Waste

Pump #4 

Stain 

Shorter 

Longer 

Shorter 

Longer 

Shorter 

Longer 

Shorter

 

Longer

 

Bracket 

Summary of Contents for QuickSlide HemaPRO


































Reviews:

No comments