manualshive.com logo in svg

Hardi NAVIGATOR EAGLE 3000, Instruction Book

Share
Download
Hardi NAVIGATOR EAGLE 3000 Instruction Book Download Page 87

87

5 - Operation

General Info

Environmental Info

For environmental info, please refer to the following parts in the Spray Technique Book:

•

Nozzles.

•

Spray quality.

•

Choosing nozzles for arable crops.

•

Spraying speed.

Sprayer Use

The HARDI sprayer is for application of crop protection chemicals and liquid fertilizers. The equipment must only be used for 
this purpose. 

If the sprayer is to be used for any other purposes than the ones described in this instruction book, a new risk assessment 
and a workplace assessment must be completed for this use. This obligation lies with the owner and operator according to 
EU directive 2009/104/EC - see “Before First Use of the Sprayer” on page 11.

Improper use of the sprayer results in risks to your safety, health, and even a risk of death. 

If no local law demands that the operator must be certified to use spray equipment, it is strongly advised to be trained in 
correct plant protection and in safe handling of plant protection chemicals to prevent unnecessary risk for persons and the 
environment, when carrying out your spray job.

Summary of Contents for NAVIGATOR EAGLE 3000



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands