manualshive.com logo in svg

Hardi NAVIGATOR EAGLE 3000, Instruction Book

Share
Download
Hardi NAVIGATOR EAGLE 3000 Instruction Book Download Page 138

6 - Maintenance

138

Nozzle Holder Assembly

If leaks of fluid occur in the nozzle holders on the spray boom, it is necessary to check the sealing. To locate the gaskets 
disassemble the nozzle holder.

Recommendation is occasional maintenance of the gaskets and nozzle holders.

Usually is poor sealing caused by:

•

Missing O-rings.

•

Damaged or incorrectly seated O-rings.

•

Dry or deformed O-rings.

•

Foreign objects.

In Case of Leaks

Disassemble the nozzle holder and check condition of the O-rings. Replace, if damaged or cracked.

Disassemble Nozzle Holders

1.

Example of an assembled nozzle holder, fitted to the spray boom.

2.

Snapped together are the black plastic parts. To disassemble, insert 
a flat screwdriver (B) and press, until the locking piece (A) snaps 
out. 

Summary of Contents for NAVIGATOR EAGLE 3000



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands