manualshive.com logo in svg

Hardi NAVIGATOR EAGLE 3000, Instruction Book

Share
Download
Hardi NAVIGATOR EAGLE 3000 Instruction Book Download Page 84

4 - Sprayer Setup

84

Manual Operation of Brake System

The dual line air brake system can be manually operated with the black 
and red push/pull buttons on the trailer release valve, placed at the front 
right side of the platform.

A decal is placed between the buttons to indicate their function.

Operating the Sprayer - Connected

When connected correctly to a tractor, the black button (A) is forced to 
its traveling position (out) and can not be pushed in. The red button (B) 
can be in both positions.

Black button (A) - Release valve:

•

Forced out: Traveling position - Air supply from the tractor is routed 
to the sprayers brake system.

Red button (B) - Parking brake:

•

Pulled out: Parking position - The parking brake is engaged.

•

Pushed in: Traveling position - The parking brake is disengaged.

Shunting the Sprayer - Disconnected

It is possible to move the sprayer, when it is not connected to a tractor, by pushing the release valve (A) in, using the air from 
the sprayers air tanks, to release the brakes.

Black button (A) - Release valve:

•

Pulled out: Traveling position - No air supply to the brake system, it is not possible to disengage the brakes.

•

Pushed in: Release position. The air from the sprayers air tanks are routed to the brake system, the brakes can be 
disengaged.

When parking the sprayer after it has been moved, without being connected to a tractor, the parking brake valve (B) must 
be pulled out to engage the parking brake.

Red button (B) - Parking brake:

•

Pulled out: Parking position - The parking brake is engaged.

•

Pushed in: Traveling position - Using the air from the sprayers air tanks to disengage the parking brake.

μ

ATTENTION! When shunting the sprayer, both buttons (A and B) must be pushed in.

μ

ATTENTION! When parking the sprayer, always engage the parking brake button (B). When the sprayer has been 
disconnected from the tractor the air brakes can only be disengaged as long as there is air in the sprayers air tanks.

μ

ATTENTION! Cover the hose couplings with the dust covers and place them on the hose package support bracket 
when disconnected.

Summary of Contents for NAVIGATOR EAGLE 3000



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands