Hardi FORCE, Operator'S Manual

Page: 36 / 52

34 HARDI ® FORCE™ BOOM OPERATOR’S MANUAL
8.5 Greasing The Breakaway Clutch
WARNING: NEVER PLACE FINGERS INTO OPEN BREAKAWAY
CLUTCH OR YOU MAY BE INJURED SHOULD CLUTCH
SNAP CLOSED!
1. Unfold the boom into operating (spraying) position.
2. Standing in front of the outer wing, snap the breakaway open
by quickly pushing the boom away from you.
3. With the two clutches opened up, stick the nozzle of a grease gun
into the clutch and apply a generous amount of grease (Fig. 39).
This should be done every 8 hours.
4. Grease the zerk at the lower pivot point until new grease becomes
visible. This should be done every 8 hours.
8.6 Maintenance of Boom Wheel
1. Oil positions shown in (Fig. 40) every 8
hours to prevent rust and corrosion.
2. Maintain approx. 30 psi in tire.
WARNING: DO NOT EXCEED MANUFACTURER'S MAX. 71 PSI IN
TIRE OR SERIOUS INJURY COULD OCCUR IF THE
TIRE SHOULD EXPLODE.
8
C
Fig. 40
8 B
Fig. 39