3 - Description
3.6
ATTENTION! Only the functions in use should be open - always close remaining valves.
ATTENTION! If a MANIFOLD valve is too tight to operate - or to loose (= liquid leakage) - the valve needs to be ser-
viced. Please see the section ‘Maintenance’ for further information.
To Self-Cleaning Filter/operating unit
On the Smart Valve a function is activated/opened by turning the
handle towards the desired function. If the lever points at an unused
position, then the Smart Valve will be closed.
From main tank (suction filter)
On the Smart Valve a function is activated/opened by turning the
handle towards the desired function. If the lever points at an unused
position, then the Smart Valve will be closed.
The valve is marked with an arrow on the green disc that indicates the amount of liquid that passes through the valve. If
handle is turned to a position near the tip of the arrow, then only a small amount of liquid is allowed to pass the valve.
Otherwise, if handle is turned to a position in the wide end of the arrow, it means that a larger amount is passing the
valve. This gives the posibility to continously adjust how large amount of fluid from the pump is used for agitation in the
tank and for spraying.
Examples on handle positions at different agitation quantities:
1. Handle is in the “widest end of arrow” position (full open).
Agitation quantity is 100%.
Agitation valve
To Fast Filling Device
From Rinsing Tank
To HARDI FILLER
From Filling Device
To Tank Flushing Nozzle
From front tank (suction filter)
To main tank
To front tank
Black valves - Black disc = Suction valve
Green valves - Green disc = Pressure valve
