4 - Sprayer setup
4.17
ATTENTION! The distance must be uniform on both upper
and lower frame part, and the distance should be in the span
175-185 mm. Measure the distances to control the uniformity!
The lift frame and the pendulum must be parallel positioned. If
necessary, the length of the 4 steering arms can be adjusted to
obtain parallel setting.
Adjustment of each steering arm is performed as follows:
1. Loosen nuts (A).
2. Place a suitable tool (e.g. a screwdriver) in the hole (B) in the turn
buckle, and use the tool to rotate the turn buckle.
Clockwise rotation: The turnbuckle becomes shorter and the distan-
ce between centre section and lift/trailer decreases.
Counterclockwise rotation: The turnbuckle becomes longer and the
distance between centre section and lift/trailer increases.
3. When correct setting has been obtained, tighten nuts (A) on the
turnbuckle again.
Parallel setting of lift and frame
