2 - General Safety Instructions
15
Warning Labels On The Sprayer
Explanation of Labels
The labels on the sprayer designate potential dangerous areas on the machine. Operators, or anyone in close range of the
sprayer must respect these warnings!
The labels should always be clean and readable! Worn or damaged labels must be replaced with new ones. Contact your
HARDI® dealer for new labels.
978434 - Risk of squeezing!
Keep hands away, when parts is moving.
978436 - Service!
Turn off the engine and remove ignition key
before performing maintenance or repair.
978439 - Lifting point!
978440 - Bolt torque
Tighten to torque settings according to
operator’s manual.
978441 - Risk of squeezing!
Stay clear of raised and unsecured loads.
978442 - Risk of falling off!
Do not attempt to enter tank.
978444 - Risk of injury!
Do not open or remove safety shields while
engine is running.
978447 - Risk of burn!
Stay clear of hot surfaces.
97802100 - Risk of death!
Do not attempt to enter tank.
97802200 - Not for drinking!
This water must never be used
for drinking.
97814500 - Hydraulic Lock Valve!
Always lock valve when leaving the sprayer
standing on hydraulic support leg.
97827000 - EasyClean filter
Open and clean filter monthly.
97842200 - Not for drinking!
This water must never be used for drinking.
10532403 - Rotating PTO
Rotating driveline contact can
cause death. Keep away!
10532503 - Hydraulic hazard
Risk of serious injury or death
from escaping hydraulic fluid.
10532603 - Not for drinking
This water must never be used
for drinking.
Nm
Nm
Summary of Contents for COMMANDER 4500
