Hard Head 006043, Operating Instructions Manual

Page: 13 / 15

EN
13
INSTALLATION
MOUNTING THE SAFE ON A WALL
1. Drill screw holes at the required place on
the wall.
2. Screw on the selected fittings, depending
on the wall material.
3. Mount the safe on the wall with selected
fittings.
4. Check that the safe is firmly in place and
tighten the screws.
IMPORTANT:
• Use suitable screws and plugs,
depending on the surface of the wall.
• Insert four new batteries with the correct
polarity as shown by the markings in the
battery compartment.
USE
POWER SUPPLY
Battery
The battery power supply is activated
automatically if there is a power failure.
IMPORTANT:
Do not mix old and new batteries, or
different types of batteries.
OPENING AND CLOSING WITH
PERSONAL CODE
1. Enter the required code (3–6 digits) and
press the LOCK button. CLOSED is shown
on the display and the safe is locked.
2. Enter the same code (3–6 digits) again.
OPENED is shown on the display and the
safe is unlocked.
SAFETY INSTRUCTIONS
Never store emergency keys in the safe.
SYMBOLS
Conforms with the
requirements in the relevant
EU directives.
Recycle as electrical waste.
TECHNICAL DATA
Battery 4 x 1.5 V AA
Size W437 x H195 x D380 mm
Weight 11.5 kg
Volume 26 L
Material Steel
Wall thickness
1.5 mm
Door thickness 5 mm
DESCRIPTION
1. Lock bolts
2. Battery compartment
3. Display
4. Clearing button
5. LOCK button
6. USB port (for CEU)
7. Emergency lock cover
8. Serial number
FIG. 1