background image

Page 6

SKU 95916

for technical questions, please call 1-800-444-3353.

Using one hand, grip the Handle (1) firmly and lower the Blade (13) as if to push 
the Blade (13) through the brick. 

Remove both pieces of the brick.
noTe: If there are small pieces of brick left on the Foam Pads (17), brush them off 
before setting the next brick for splitting. 

If you need to split bricks of another size, follow steps 1 through 3 of this section.

inspecTion, MainTenance, and cleaning

before each use, inspect the general condition of the tool.  Check for loose 
screws, misalignment or binding of moving parts, cracked or broken welds or parts,  
and any other condition that may affect its safe operation. 

do not use damaged 

equipment.

MainTenance charT

Maintenance Type

before 

use

after 

use

weekly Monthly

every 6 
Months

yearly

Inspect tool for damage
(see #1, above)

X

Wipe off with clean, moist 
cloth

X

TroubleshooTing

problem

possible causes

probable solutions

1. Handle (1) does 
not raise or lower 
smoothly. 
2. Brick does not set 
level on Foam Pads 
(17)

Check for small pieces of brick 
residue possibly caught in Stretch 
Spring (3) or between Handle (1) 
and Blade Guard (9).
Possibly small pieces of brick on 
the Foam Pads (17)

1.

2.

Blow out, or dust off the Stretch 
Spring (3). Blow out or dust off the 
Handle (1) where it joins the Blade 
Guard (9).
Dust off the Foam Pads (17) and all 
areas of the Base (14).

1.

2.

please read The following carefully

THE  MANUFACTURER  AND/OR  DISTRIBUTOR  HAS  PROvIDED THE  PARTS  LIST  AND  ASSEMBLY  DIAGRAM  IN THIS 

MANUAL AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESEN-
TATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE 
PRODUCT,  OR THAT  HE  OR  SHE  IS  qUALIFIED TO  REPLACE  ANY  PARTS  OF THE  PRODUCT.    IN  FACT, THE  MANU-
FACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE 
UNDERTAKEN  BY  CERTIFIED  AND  LICENSED TECHNICIANS,  AND  NOT  BY THE  BUYER.   THE  BUYER  ASSUMES  ALL 
RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS 
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

7.

8.

9.

1.

Summary of Contents for 95916








Reviews: