background image

SKU 94683         For technical questions, please call 1-800-444-3353         PAGE 5

Improperly connecting the grounding wire can result in the risk of electric shock.  Check
with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
Do not modify the power cord plug provided with the tool.  Never remove the grounding
prong from the plug.  Do not use the tool if the power cord or plug is damaged.  If damaged,
have it repaired by a service facility before use.  If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician.

GROUNDING

WARNING!

SAVE THESE  INSTRUCTIONS

10.

Do not use the Bug Vacuum without its Mesh Screen (7) or Vacuum Filter
(8) in place.

11.

Do not use the Bug Vacuum if it has been dropped, damaged, left outdoors,
or immersed in liquid.

12.

Avoid accidental falls.  Use extra care when cleaning on stairways.

13.

Do not vacuum toxic, carcinogenic, or other hazardous materials such as
asbestos, arsenic, barium, beryllium, lead, pesticides, or other health
endangering materials.

14.

Do not expose the Bug Vacuum to rain.  Store the unit indoors.

15.

Do not handle the Charger (6) of this product with wet hands.  Never plug
the Charger into an electrical outlet while standing on a wet or damp surface.

16.

Do not unplug the Charger (6) by pulling on its Power Cord.  Do not pull or
carry the Charger by its Power Cord.  Keep the Power Cord away from sharp
corners or edges.

17.

        WARNING!  People with pacemakers should consult their physician(s)
before using this product.  Operation of electrical equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.

18.

        WARNING!  The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur.  It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.

Summary of Contents for 94683













Reviews: