Harbor Freight Tools 94683 Assembly And Operating Instructions Manual Download Page 10

SKU 94683        For technical questions, please call 1-800-444-3353        PAGE 10

Directions For Bug Disposal:

1.

    Fire hazard:  Do not spray pesticides or other flammable agents into the Bug
    Vacuum during use.  Allow all pesticides, if used, to dry before using the
    Vacuum.

FIGURE H

VACUUM (1)

EXTENSION TUBE  (3)

BUG CHAMBER (2)

WIDE BUG

CATCHER

(5)

TROUBLESHOOTING

Problem Possible 

Solution 

Tool does not turn on. 

1. Make sure the Power Switch is in its 
    “ON” position. 
 
2. Make sure to plug the Charger into a 
    working, 120 volt, grounded, electrical 
    outlet. 
 
3. Make sure to charge the Battery fully from 
    14 to 16 hours. 
 
4. Have a qualified service technician 
    check out the tool. 

Tool turns on, but has little or no suction. 

1. Make sure to charge the Battery fully from 
    14 to 16 hours. 
 
2. Make sure all connections are tight. 
 
3. Make sure no openings in the tool are 
    clogged. 
 
4. Make sure the Vacuum Filter and/or 
    Mesh Screen is clean. 
 
5. Have a qualified service technician 
    check out the tool. 

 

TIP THIS  END

TO DISPOSE
OF INSECTS

Summary of Contents for 94683













Reviews: