background image

SKU 65930        

For technical questions, please call 1-800-444-3353.

 

PAGE 5

SPECIFIC SAFETy RULES

maintain a safe working environment.  

1. 

Keep the work area well lit.  Make sure 

there  is  adequate  surrounding  workspace.    Always  keep  the  work  area  free  of 
obstructions, grease, oil, trash, and other debris.  Do not use the Cordless Drill in 
areas near flammable chemicals, dusts, and vapors.  Do not use this product in a 
damp or wet location.

maintain labels and nameplates on the Cordless Drill.  

2. 

These carry important 

information.    If  unreadable  or  missing,  contact  Harbor  Freight  Tools  for  a 
replacement.

When using the Cordless Drill, always maintain a firm grip on the tool with 

3. 

both hands.

Hold the tool by its insulated gripping surfaces when performing an operation 

4. 

where the Cordless Drill may contact hidden wiring.  

Contact with a “live” wire 

will make exposed metal parts of the Cordless Drill “live” and shock the operator.

Do not use the Cordless Drill or Charger (29) if it has been dropped, damaged, 

5. 

left outdoors, or immersed in liquid.

To avoid electric shock, do not pull or carry the Charger by its Power Cord or 

6. 

pull the Power Cord around sharp corners or edges.  

Do not unplug the Charger 

by pulling on the Power Cord.  Keep the Power Cord away from heated surfaces.

To avoid electrical shock, do not handle the Charger, the Adapter (30), or the 

7. 

Cordless Drill with wet hands.

Keep  the  Handles  of  the  Cordless  Drill  dry,  clean,  and  free  from  oil  or 

8. 

grease.

Avoid unintentional starting.  

9. 

Make sure you are prepared to begin work before 

turning on the Cordless Drill.

Never leave the Charger unattended when it is plugged into an electrical outlet.  

10. 

Unplug the Charger from its electrical outlet before leaving.

PROPER BATTERy PACK CARE: Battery Pack (28) leakage may occur under 

11. 

extreme usage or temperature conditions.  

If Battery Pack fluid comes in contact 

with skin, rinse with lemon juice and vinegar then wash with soap and water.  If the 
fluid comes into contact with the eyes, flush with water for several minutes and contact 
a doctor immediately.  Never burn the Battery Pack, as it can explode in a fire.  Do 
not charge the Cordless Drill with a leaking Battery Pack.  Contact local solid waste 
authorities for instructions on correct disposal or recycling of the Battery Pack.

12. 

WARNING! 

Some dust created by power sanding, sawing, grinding, drilling, and 

other construction activities, contain chemicals known (to the State of California) to 
cause cancer, birth defects or other reproductive harm.  Some examples of these 
chemicals are: lead from lead-based paints, crystalline silica from bricks and cement 
or other masonry products, arsenic and chromium from chemically treated lumber.  

Summary of Contents for 65930















Reviews: