background image

Page 10

For technical questions, please call 1-888-866-5797.

Item 63072 

        

Inspection, Maintenance, and Cleaning

  Procedures not specifically explained in this manual  

must be performed only by a qualified technician. 
Any guard or other protective device removed for servicing must be replaced before operation.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: 
Close the valve on the propane tank, allow the product to cool for at least 30 minutes, and 
disconnect the propane tank before performing any procedure in this section.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: 
Do not use damaged equipment.  If abnormal noise or vibration 
occurs, have the problem corrected before further use.

1. 

BEFORE EACH USE,

 inspect the general 

condition of the product.  Check for:
•  check all gas fittings for tightness
•  loose hardware
•  misalignment or binding of moving parts
•  cracked or broken parts 
•  any other condition that may 

affect its safe operation

•  do a leak test using soapy water –

refer to number 2 on page 9.

2. 

AFTER USE,

 wipe external surfaces 

of the tool with clean cloth.

3. 

STORE

 this product in a clean, dry location out of 

reach of children.  If storing indoors, first shut off and 
remove the propane tank and leave it outdoors.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM 
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER OR DISTRIBUTOR 
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS 
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE 
ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY 
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND 
LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY 
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS 
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Serial Number Here: 
 

Note:

 If product has no serial number, record month and year of purchase instead.

Note:

 Some parts are listed and shown for illustration purposes only, and 

are not available individually as replacement parts.

Summary of Contents for 63072













Reviews: