background image

Page 3

SKU 45703

7.

Dress properly

.  Do not wear loose clothing or jewelry as they can be caught in

moving parts.  Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working.  Wear restrictive hair covering to contain long hair.

8.

Do not overreach

.  Keep proper footing and balance at all times. Do not reach over or

across running machines.

9.

Maintain tools with care

.  Keep tools sharp and clean for better and safer

performance. Follow instructions for lubricating and changing accessories. Inspect tool
cords periodically and, if damaged, have them repaired by an authorized technician.
The handles must be kept clean, dry, and free from oil and grease at all times.

10.

Disconnect power

. Unplug tool when not in use.

11.

Remove adjusting keys and wrenches

.  Check that keys and adjusting wrenches

are removed from the tool or machine work surface before plugging it in.

12.

Avoid unintentional starting

.  Be sure the switch is in the Off position when not in

use and before plugging in. Do not carry any tool with your finger on the switch,
whether it is plugged in or not.

13.

Stay alert

.  Watch what you are doing, use common sense. Do not operate any tool

when you are tired.

14.

Check for damaged parts

.  Before using any tool, any part that appears damaged

should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if any switch does not turn On and Off properly.

15.

Guard against electric shock

.  Prevent body contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerator enclosures.

16.

Replacement parts and accessories

.  When servicing, use only identical

replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.

17.

Do not operate tool if under the influence of alcohol or drugs

.  Read warning

labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.

18.

Maintenance

.  For your safety, service and maintenance should be performed

regularly by a qualified technician.

Note

: Performance of this tool may vary depending on variations in local line voltage. Exten-

sion cord usage may also affect tool performance.

Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.

Summary of Contents for 45703














Reviews: