Page 12
SKU 45703
Maintenance
WARNING: Before performing any maintenance on this machine, unplug the line cord
from the electrical outlet.
1.
Clean accessories with mild soap and water.
2.
Do not immerse the Motor Base in water.
3.
Sharpen the cutter edges and grille when they become dull.
4.
Do not wash the Coffee Mill accessory, wipe with a clean cloth.
5.
Store all components in the factory box, in a clean and dry location.
6.
Apply a small amount of light oil to the metal gear wheels and reduction gear shaft no
less than once a year.
7.
If an overload occurs, press the small reset button located on the Motor Base.
8.
Service of this machine should only be done by a qualified technician.
Adapter Replacement
When processing food, if something hard enters the grinder and stops the accessory from
moving, it can damage many internal parts. To prevent overload damage, a plastic Adapter
gear is used between the motor and the accessory. When a jam occurs, the Adapter may
break as a safety measure. Extra Adapters are provided with your machine. Follow these
instructions to replace it.
1.
Remove the accessory housing to expose the Adapter (see illustrations below).
2.
Use the Adapter Hook or bent paper clip, and insert it into the Adapter slot.
3.
Pull the Adapter off the Worm Drive.
4.
Replace the damaged Adapter with a new one.
5.
Replace the accessory housing.
