WIRING
Wrap electrical tape around each individual
wire connector (CC) down to the wire as
shown in Fig. 2.
WARNING:
Make sure no bare wire or
wire strands are visible after making
connections. Place green and white
connections on opposite side of box from the
black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently
push wires and wire connectors (CC) into
outlet box.
CC
CC
CC
E3 Wire Connector x4
2.
Hardware Used
1
2
3
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
IMPORTANT
: Using a full range dimmer
switch (not included) to control fan speed will
cause a loud humming noise from fan. To
reduce the risk of fire or electrical shock, do
NOT use a full range dimmer switch to control
fan speed. (Fig. 3)
3.
2
3
CC
12
