3
2
TABLE OF CONTENTS
Safety Information............................................................................................................... 3
Package Contents............................................................................................................... 4
Hardware Contents............................................................................................................. 5
Preparation.......................................................................................................................... 5
Assembly Instructions......................................................................................................... 6
Operating Instructions.......................................................................................................... 12
Care and Maintenance........................................................................................................ 13
Troubleshooting................................................................................................................... 13
Warranty.............................................................................................................................. 14
Replacement Parts List ...................................................................................................... 14
Lowes.com/harborbreeze
Lowes.com/harborbreeze
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• When using an existing outlet box, be sure the box is securely attached to the building structure
and can support the full weight of the fan, so as to avoid potential serious injury or death.
•
All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and local
electrical codes. Electrical installation should be performed by a qualified licensed electrician.
• Electrical diagrams are for reference onl
y.
• Suitable for use in damp locations when installed in a GFCI protected branch circuit. Use only with
light kits marked suitable for use in damp locations.
• Do not use bulbs that have a wattage greater than the maximum value stated on the fixture and in
this manual. Using a higher wattage bulb than specified will increase fixture temperature and cause
risk of fire. Disconnect the electrical supply circuit to the fan before installing light kit.
•
The net weight of this fan including the light kit is: 19.6 lbs.
WARNING
To reduce the risk of injury to persons, install fan
so that the blades are at least 7 ft. (2,1 m)
above the floor.
CAUTION
READ AND SAVE THESE INSTRUCTIONS
To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked
“ACCEPTABLE FOR FAN SUPPORT OF 35 LBS OR LESS” and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support of lighting
fixtures are not acceptable for fan support and may need to be replaced. Consult a
qualified electrician if in doubt.
WARNIN G
To reduce the risk of personal injury, do not bend the blade brackets when installing the
brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
To reduce the risk of electric
shock, make sure electricity has
been turned off at the circuit
breaker or fuse box before
beginning installation.
WARNING
To reduce the risk of electric shock, do not use this fan with any solid-state speed
control device.
WARNING
ELECTRIC SHOCk HAZARD
ELECTRIC SHOCk HAZARD
PERSONAL INJURY HAZARD
PERSONAL INJURY HAZARD
FIRE, ELECTRICAL SHOCk OR PERSONAL INJURY HAZARD
