Harbor Breeze OCEANSIDE, Manual

Page: 14 / 15

12 13
Lowes.com/harborbreeze Lowes.com/harborbreeze Lowes.com/harborbreeze Lowes.com/harborbreeze
19
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
F
19. Pass the pull chains through the pull chain nuts on the
extension (CC) to the pull chain labeled FAN on
the switch housing (C). Attach the light kit pull chain
extension (DD) to the pull chain labeled LIGHT on
the switch housing (C).
DD
CC
C
Hardware Used
x 1 Fan pull chain extension
x 1
Light pull chain extension
CC
DD
PULL CHAIN:
(1). The fan pull chain, labeled FAN on the switch housing, has four positions. One pull is HIGH,
two pulls is MEDIUM, three is LOW and four turns the fan OFF.
(2). Pull the light pull chain, labeled LIGHT on the switch housing, to turn the light ON or OFF.
REVERSE SWITCH:
When the season changes, you may want to change the direction
your fan spins. To switch between clockwise and counterclockwise
NOTE: Wait for fan to stop before reversing the switch.
2A. In cooler weather, clockwise rotation creates an upward
2B. In warmer weather, counterclockwise rotation creates a
DOWN and see a Sun icon.
icon
Sun icon
CARE AND MAINTENANCE
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Excessive wobbling. 1. Unbalanced blades. 1. Use blanced kits.
2. Blades are loose. 2. Tighten all blade screws.
3. Blade brackets incorrectly attached. 3. Reinstall blade brackets.
4. Fan not securely mounted. 4. Turn off power. Carefully loosen
canopy, remount securely.
Noisy operation. 1. Blades are loose. 1. Tighten all blade screws.
2. Cracked blade. 2. Replace blades (call customer
3. Non-approved speed control. service).
3. Replace with an approved speed
control device.
Fan does not move. 1. Chain switch is “off”. 1. Pull chain switch.
.
3. Power is off or fuse is blown. 3. Turn power on or check fuse.
4. Turn power off. Loosen motor
housing, check all connections.
• Important: Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
• At least twice each year, lower motor housing to check fan motor assembly, and then tighten all
screws on the fan.
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to
blades for added protection.