8
9
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
11
9
Lowes.com/harborbreeze
Lowes.com/harborbreeze
Lowes.com/harborbreeze
Lowes.com/harborbreeze
7. Attach a blade (H) to a blade bracket (G) using the
blade screws (EE) as shown in Step 7. Start a blade
screw (EE) and a blade washer into the blade bracket (G).
Repeat for the remaining blade screws (EE) and blade
washers.
Tighten each blade screw (EE) securely.
8. Fasten the blade bracket (G) to the fan motor by inserting
the alignment post into the slot on the bottom of the motor
and tightening the blade bracket screws with washers.
Please note that the blade bracket screws with washers
are pre-installed into the blade bracket (G).
Repeat the steps for the remaining blades (H) and blade
brackets (G).
10. Attach the switch housing cover (D) to the switch
housing (C). Align holes in switch housing cover (D)
with holes on outer edge of the switch housing (C).
(Note: The wide gap in the edge of the switch housing
cover (D) should align with reverse switch on the
switch housing (C).) Re-insert screws and secure all
screws.
11. Attach the fan pull chain extension (CC) to the pull
chain labeled FAN on the switch housing (C).
If using fan WITHOUT the light kit, assembly is
complete.
12. Remove the plastic plug from the center hole of
the switch housing cover (D).
9. Remove the three screws from the switch housing
cover (D).
7
8
E
JJ
EE
H
G
G
H
Hardware Used
Blade screw x16
EE
D
If you wish to use the fan WITHOUT the light kit,
continue to Step 10.
If you wish to use the fan WITH the light, skip to
Step 12.
slot alignment
post
screw with
washer
Hardware Used
Fan pull chain extension x1
CC
CC
C
D
D
10
12
plastic plug
