background image

18

GGLI2208

REPLACEMENT PARTS LIST

A

Downrod

B

Canopy

C

Mounting Bracket

H

Blade

 

Light Kit Fitter

5127874-A
5127874-B
5127874-C
5127874-H
5127874-I

 PART           DESCRIPTION             PART #

A

B

H

I

Printed in China

LIMITED LIFETIME WARRANTY

The distributor warrants this fan to be free from defects in workmanship and materials present at time of 

shipment from the factory for Lifetime limited from the date of purchase.  This warranty applies only to the 

original purchaser. The distributor agrees to correct any defect at no charge or, at our option, replace the 

ceiling fan with a comparable or superior model.

To obtain warranty service, present a copy of your sales receipt as proof of purchase.  All cost of removal and 

reinstallation are the express responsibility of the purchaser.  Any damage to the ceiling fan by accident, 

misuse or improper installation, or by using parts not produced by the manufacturer of this fan or affixing 

accessories not produced by the manufacturer of this fan, are the purchaser's own responsibility.  The 

distributor assumes no responsibility whatsoever for fan installation during the limited lifetime warranty.  Any 

service performed by an unauthorized person will render the warranty invalid.

Due to varying climatic conditions, this warranty does not cover changes in brass finish, rusting, pitting, 

tarnishing, corroding or peeling.  Brass finish fans maintain their beauty when protected from varying weather 

conditions.  Any glass provided with this fan is not covered by the warranty.

Any replacement of defective parts for the ceiling fan must be reported within the first year from the date of 

purchase.  For the balance of the warranty, call our customer service department (

at 

888-251-1003

)

 for return 

authorization and shipping instructions so that we may repair or replace the ceiling fan.  Any fan or parts 

returned improperly packaged is/are the sole responsibility of the purchaser.  There is no further express 

warranty.  The distributor disclaims any and all implied warranties.  The duration of any implied warranty which 

cannot be disclaimed is limited to the limited lifetime period as specified in our warranty.  The distributor shall 

not be liable for incidental, consequential or special damages arising at or in connection with product use or 

performance except as may otherwise be accorded by law.  This warranty gives you specific legal rights and 

you may also have other rights which vary from state to state.  This warranty supersedes all prior warranties.

C

For replacement parts, call our customer service department at 

888-251-1003

, 8 a.m. - 8 p.m., EST, 

Monday - Sunday. You could also contact us at [email protected].

Summary of Contents for LANDON LAN52SS5L



















Reviews: