background image

WIRING

11

1c. 

FAN AND LIGHT CONTROLLED BY TWO 

WALL SWITCHES:

 Connect BLACK wire from 

fan to BLACK (or RED) wire from the 
independent wall switch for the fan. Connect 
BLUE wire from fan to the BLACK (or RED) wire 
from the other independent wall switch for the 
light. Connect WHITE wire from fan to WHITE 
wire from ceiling. Connect GROUND (GREEN) 
wires  from downrod (A) and mounting bracket 
(C) to BARE/GREEN wire from ceiling.

NOTE:

 BLACK wire is hot power for fan. BLUE wire 

is hot power for light kit. WHITE wire is common for 
fan and light kit. GREEN or BARE wire is ground.

Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c) 
that fits your situation and make appropriate wiring 
connections as follows: [

IMPORTANT:

 Use one of 

the wire connectors (CC) provided to make each 
wire connection, making sure to screw wire 
connector (CC) on in a clockwise direction.]

1a. 

FAN AND LIGHT CONTROLLED BY PULL 

CHAINS:

 Connect BLACK and BLUE wire from 

fan to BLACK wire from ceiling. Connect WHITE 
wire from fan to WHITE wire from ceiling. 
Connect GROUND (GREEN) wires from 
downrod (A) and mounting bracket (C) to 
BARE/GREEN wire from ceiling.

 1.

1b. 

FAN CONTROLLED BY PULL CHAIN, 

LIGHT BY WALL SWITCH:

 Connect BLACK 

wire from fan to BLACK wire from ceiling. 
Connect BLUE wire from fan to the BLACK (or 
RED) wire from the independent wall switch for 
the light. Connect WHITE wire from fan to 
WHITE wire from ceiling. Connect GROUND 
(GREEN) wires from downrod (A) and mounting 
bracket (C) to BARE/GREEN wire from ceiling.

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

1a

FAN AND LIGHT CONTROLLED BY PULL CHAINS

120V POWER 
FROM CEILING

BLACK (POWER)

WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

1c

120V POWER 
FROM CEILING

BLACK (WALL SWITCH)

BLACK (WALL SWITCH FOR LIGHT)

WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

1b

WHITE

BLACK

BLUE

120V POWER 
FROM CEILING

BLACK (POWER)

BLACK (WALL SWITCH)
WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

GREEN

WHITE

BLACK

BLUE

GREEN

WHITE

BLACK

BLUE

GREEN

Summary of Contents for LANDON LAN52SS5L



















Reviews: