background image

13

4

.  

In warmer weather, counterclockwise rotation 

     creates a downward air flow, which cools the air.
     Push the switch LEFT and see a SUN icon.

In cooler weather, clockwise rotation creates an 
upward air flow, which moves hot air from the ceiling 
into the room. Push the switch RIGHT and see a 
SNOWFLAKE icon.

CARE AND MAINTENANCE

Important:

 Shut off main power supply before beginning any maintenance.  Do not use water or a 

damp cloth to clean the ceiling fan.

Bulb Replacement: Use two (2) 5.5 watt max type A-15 LED bulbs CFL bulbs are not 
recommended for this item.

At least twice each year, tighten all screws and lower canopy motor housing to check mounting

 bracket screws and hex nuts.. 

Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean 
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood 
blades for added protection.

OPERATION INSTRUCTIONS

4

3

.  

When the season changes, you may want to change 

     the direction in which the fan spins. To switch between 
     clockwise and counterclockwise rotation, flip the fan 
     reversal switch.

NOTE: 

Wait for fan to stop before reversing the switch.

3

Summary of Contents for L1901

















Reviews: