2
15
NOTE:
Make sure reverse switch is firmly in left or right
position. Fan will not operate when switch is in the middle.
2.
When the season changes, you may want to change the
direction the fan spins. In warmer weather,
counterclockwise rotation creates a downward air flow,
which cools the air. Push the reverse switch located on
switch housing (L) LEFT and see a SUN icon. In cooler
weather, clockwise rotation creates an upward air flow,
which moves hot air from the ceiling into room. Push the
reverse switch RIGHT and see a SNOWFLAKE icon.
CARE AND MAINTENANCE
OPERATING INSTRUCTION
$WOHDVWWZLFHHDFK\HDUWLJKWHQDOOVFUHZVDQGORZHUFDQRS\WRFKHFNPRXQWLQJSODWHVFUHZV
&OHDQIDQKRXVLQJZLWKRQO\DVRIWEUXVKRUOLQWIUHHFORWKWRDYRLGVFUDWFKLQJWKHILQLVK&OHDQEODGHV
ZLWKDOLQWIUHHFORWK<RXPD\RFFDVLRQDOO\DSSO\DOLJKWFRDWRIIXUQLWXUHSROLVKWRZRRGEODGHVIRU
added protection.
%XOE5HSODFHPHQW8VHIRXUZDWWPD[W\SH$LQFDQGHVFHQWEXOEV&)/EXOEVDUHQRW
recommended for this item.
/RZHVFRPKDUERUEUHH]H
Important:
6KXWRIIPDLQSRZHUVXSSO\EHIRUHEHJLQQLQJDQ\PDLQWHQDQFH'RQRWXVH
water or a damp cloth to clean the ceiling fan.
CAUTION:
7XUQRIIDQGZDLWIRUIDQWRVWRSEHIRUH
moving the reverse switch.
L
PROBLEM
CORRECTIVE ACTION
PROBABLE CAUSE
PROBLEM
1. Set screws are loose.
1. Tighten all set screws.
2. Using non
approved speed
control.
2. Some fan motors are sensitive to signals
from solid
state vari
E
le speed controls.
'
O
NOT USE a solid
state varia
E
le speed control.
3. Normal noise.
3. Allow "
E
reak
in" period of 2
hours. Most
noises associated with a new fan will disappear
after this period.
. Wire connectors inside
switch housing rattling.
.
&
heck to make sure wire connectors in
switch housing are not rattling against each
other or against the interior wall of the switch
housing.
5.
&
racked
E
lade.
5. Replace
E
lades.
Fan sounds noisy.
TROUBLESHOOTING
