14
FINAL INSTRUCTIONS
Lowes.com/harborbreeze
10. Connect the fobs (EE) to the appropriate pull chains.
For assembly without the light kit, you can discard the
fob (EE) with the light image.
9
I
Screw
L
DD
H
Hardware Used
EE
x 2
Fob
Attach the connector from the switch housing (L) to
connector from the motor housing (H). Then, attach
the switch housing (L) to the mounting plate (I) using
the three screws previously removed (step 4, page
12). Tighten securely, then attach plastic plug (DD) into
hole in the middle of switch housing (L).
9.
Hardware Used
DD
x 1
Plastic Plug
10
EE
The fob (EE) marked with a fan image is for motor
speed control: High, Medium, Low and Off. Pull once
for each position.
1.
The fob (EE) marked with a lamp image controls the
light, either ON or OFF with each pull of the chain.
1
EE
OPERATING INSTRUCTIONS
Note:
The two connectors have keyholes that must be
mated correctly before they can be engaged.
