12
FINAL INSTRUCTIONS
4. Remove three switch housing screws (S) preinstalled on
the switch housing (H) and save them for later use.
5. Attach the connector from the light kit (K) to the
connector from the motor housing (G).
Then, align the light kit (K) to the switch housing (H)
and secure with the switch housing screws (S)
previously removed.
5
Lowes.com/harborbreeze
H
K
S
G
4
S
H
3. Loosen (do not remove) the motor screws (T) from
motor housing (G) and discard the preassembled
motor blocks. Slide the blade assemblies onto motor
housing (G) and tighten the motor screws (T) securely.
3
G
T
Motor Block
Note:
If you misplace one or two motor screws during
installation of the blade assemblies, use the extra motor
screws (CC) instead.
Note:
The two connectors have keyholes that must be
mated correctly before they can be engaged.
Note:
Make sure to keep loose hardware separate to
avoid confusion during installation.
