15
WARNING
: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
POSSIBLE CAUSE CORRECTIVE ACTION
Fan does not
move.
1. Power is off or fuse is blown.
2. Faulty wire connection.
1. Turn power on or check fuse.
2. Turn power off. Loosen motor
housing and check all connections.
Noisy operation.
1. Blades are loose.
2. Cracked blade.
3. Fan is new.
4. Motor housing is loose.
1. Tighten all blade screws.
2. Replace blade.
3. Allow fan a “break in” period of a
few days, especially when running
the fan at Medium and High
speeds.
4. Turn power off. Carefully loosen
motor housing and verify that
mounting plate is secure according
to instructions on page 6.
Excessive
wobbling.
1. Blades are loose.
2. Unbalanced blades.
3. Fan not securely mounted.
1. Tighten all blade screws.
2. Switch one blade with a blade
from the opposite side or use
balancing kit (N).
3. Turn power off. Carefully loosen
motor housing and verify that
mounting plate is secure.
NOTE:
A small amount of "wobble" is normal and should not be considered a defect.
TROUBLESHOOTING
Fan operates but
light fails (if
applicable).
1. Wires in outlet box not wired
properly.
2. Wall switch to fan is off.
1. Check wires in outlet box and, if
necessary, re-wire according to
instructions on pages 8 - 9.
2. Make sure that wall switch to fan
is on.
