12
INSTALLING FAN WITH LIGHT KIT
Align grooves on glass shade (F) with nodules
on inside of LED light kit (E) and push up gently
on glass shade (F). Turn glass shade (F)
clockwise
until it no longer turns.
NOTE:
The use of rubber grip gloves are
recommended should you need to remove the
glass shade (F).
Assembly is now complete.
3.
3
INSTALLING FAN WITHOUT LIGHT KIT
F
E
If you wish to use the fan WITHOUT the light
kit
, carefully arrange (but do
NOT
connect) the
wiring in center of fitter plate (D).
DANGER:
Do NOT allow wires to remain
outside of posts on fitter plate (D) as this could
damage the wires
, which could cause the risk of
fire, electrical shock, personal injury or death
.
DANGER:
Make sure wires do not get
pinched in between LED light kit (E) and post(s)
on fitter plate (D). This could cause damage to
the wire(s)
, which could cause the risk of fire,
electrical shock, personal injury or death
.
WARNING:
To reduce the risk of personal
injury, make sure the male and female plugs for
the LED light kit (E) are
NOT
connected before
continuing.
Align slotted holes in LED light kit (E) with
loosened screws in fitter plate (D). Twist LED
light kit (E) to lock. Re-insert fitter plate screw
(J) previously removed (step 5, page 11) and
tighten all three fitter plate screws (J) with a
Phillips screwdriver.
1.
1
D
E
J
