10
FINAL INSTALLATION
2
B
C
2. Slide housing ring (B) up to top of motor housing
(C), making sure to align tabs inside housing
ring (B) with four indentations at top of motor
housing (C).
IMPORTANT:
The tabs must fit snugly over the
indentations to ensure a secure fit.
Tab
Remove one preassembled motor plate screw
(I) from motor plate (on underside of motor) and
partially loosen the other two motor plate screws
(I). Align slotted holes in fitter plate (D) with
loosened motor plate screws (I), allowing female
plug from motor housing (C) to come through
hole in middle of fitter plate (D). Twist fitter plate
(D) to lock. Re-insert motor plate screw (I) that
was removed and tighten all three motor plate
screws (I) securely.
4.
4
I
I
D
3.
Hardware Used
Insert a blade (H) through one of the slots on
the band on the motor housing (C). Align holes
and attach the blade (H) to the motor with blade
screws (AA) and fiber blade washers (BB).
Then, tighten each blade screw (AA), starting
with the one in the middle. Repeat for remaining
blades (H).
AA
Blade Screw x 15
Fiber Blade Washer x 15
BB
Motor Plate
Female Plug
C
Indentation
H
AA
BB
C
3
(
View from
Underside
)
