14
OPERATING INSTRUCTIONS
2. Restore electrical power. Within 30 seconds of
restoring electrical power, press the “OFF” button
on the front of the remote control transmitter for
5 seconds or until light on the fan blinks twice. Use
the remote control to test the light and fan functions
to confirm the learning process is complete.
IMPORTANT
: To prevent damage to remote
control transmitter, remove the battery if not used
for long periods. Store the remote control
transmitter away from excess heat or humidity.
Operation buttons on the panel of the remote
control transmitter:
H button
for fan HIGH speed
M button
for fan MEDIUM speed
L button
for fan LOW speed
OFF button
for turning fan OFF
REV button
to
REVERSE
blade direction
(fan must be on
LOW
before
reversing blade direction)
button
for light BRIGHTNESS and
to turn light OFF
The light function is controlled by pressing the
button. Hold button down to increase or decrease
light. Tap button quickly to turn light off or on. If you
press the button in excess of 0.7 seconds, it
becomes a dimmer. The light varies cyclically in
8 seconds. The light button has an auto resume
function that keeps the light at the same brightness
as the last time it was turned off.
3.
At least twice each year, lower motor housing (C) to check mounting plate (A) assembly, and then
tighten all screws. Clean motor housing (C) with only a soft brush or lint-free cloth to avoid scratching
the finish. Clean blades (H) with a lint-free cloth. You may occasionally apply a light coat of furniture
polish to wood blades for added protection.
IMPORTANT:
Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
• Total wattage for this fixture is 16 watts; do not attempt to replace the LEDs.
CARE AND MAINTENANCE
2
3
