14
Lowes.com/harborbreeze
Restore electrical power. Within 30 seconds of
restoring electrical power, press the “LEARN”
button, located on right-hand side at top of battery
compartment, for 3 seconds or until fan switches to
MEDIUM speed. Use the remote control transmitter
(G) to test the light and fan functions (see Operating
Instructions for Remote Control and Fan on page
15) to confirm the learning process is complete.
IMPORTANT
: To prevent damage to remote control
transmitter (G), remove the battery (Q) if not used
for long periods. Store the remote control transmitter
(G) away from excess heat.
2. Locate dimmer switch on left-hand side at top of
battery compartment. Dimmer switch has been
pre-set to the “ON” position (DIM). [Note: If you
prefer
not
to have dimming capability, set the
dimmer switch to the “OFF” position (ON/OFF)].
Place battery (Q) in battery compartment and then
replace battery cover on back of remote control
transmitter (G).
3.
AUTOMATED LEARNING PROCESS/ACTIVATING CODE
Remove battery cover from back of remote control
transmitter (G).
Locate battery (Q) in hardware pack, then remove
plastic wrap from battery (Q). Install battery (Q) but
leave battery (Q)
outside
of battery compartment
until learning process is complete.
1.
CAUTION:
The remote control transmitter (G) can
be programmed to multiple receivers or fans. If this is
not
desired, turn wall switch off to any other
programmable receiver or fan.
2
3
1
(back)
9V
Battery
Cover
G
Q
9V
DIMMER
SWITCH
ON/OFF
ON/OFF
(back)
Battery Cover
R
G
LEARN
BUTTON
9V
ON/OFF
ON/OFF
G
Q
