FAN MOUNTING
9
Lowes.com/harborbreeze
5
5. Insert downrod (A) through canopy (B) and yoke
cover (E). Thread wires from motor housing (D)
through downrod (A).
Remove pin (M) and clip (N) from downrod (A).
Partially loosen preassembled set screws in motor
housing yoke on top of motor housing (D).
*Helpful Hint:
Downrod-style mounting is best
suited for ceilings 8 ft. high or higher. For taller
ceilings you may want to use a longer downrod
(not included). Angle-style mounting is best suited
for angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance.
Set
Screw
4a.
N
D
M
4a
4b
A
4b.
A
B
E
6. Slip downrod (A) into motor housing yoke, align
holes and re-install pin (M) and clip (N). Tighten
set screws in motor housing yoke and then
tighten preassembled nuts on the set screws.
Slide yoke cover (E) down until it rests on top
of motor housing (D).
6
A
P
E
D
M
N
Set
Screw
