BLADE INSTALLATION
1
J
J
M
BB
K
NOTE: Periodically check blade holder hardware
and resecure if necessary.
WARNING
To reduce the risk of personal injury, do
not bend the blade holders when install-
ing, balancing the blades or cleaning the
fan. Do not insert foreign objects in
between the rotating blades.
Hardware Used
x 10
Screws
Hardware Used
BB
AA
Pan-Head
Screws
x 15
1. Lay flat side of blade holder medallion (K) on
a flat surface with the inside of the blade
holder medallion (K) facing up. This is the side
with the threaded posts and pitched foot.
Position the blade (M) over the blade holder
medallion (K) with the threaded posts
showing. Make sure the bottom edge of the
blade (M) is fully seated against the blade
holder medallion (K). Place blade holder arm
(J) on top of the blade holder cover (M),
positioning the holes over the threaded posts.
Tighten pan-head screws (BB) to secure the
blade (M) and blade holder arm (J) to the
blade holder medallion (K). (Fig. 1)
2
2. Attach blade holder arms (J) to the hub of
motor assembly (A) using screws (AA). (Fig. 2)
A
AA
12
