LLIGHT PLATE ASSEMBLY INSTALLATION
1
2
3
G
G
1. Securely attach the 9-pin connector from the
motor assembly (A) to the wire harness socket
within the light plate assembly (G).
(Fig. 1)
3. Securely attach the 4-pin and 2-signal-pin
connector from the motor assembly (A) to the
socket plate assembly (H). (Fig. 3)
2. Remove one of the three screws in the support
bracket on motor assembly (A). Slightly loosen
the remaining two screws. Assemble the light
plate assembly (G) to the motor assembly (A)
using the two key slots in the adapter
assembly. Replace the third screw and
securely tighten all three screws. (Fig. 2)
A
A
G
H
13
