30
The start of the operation in program mode starts from the PV at the time of the start (when PV2 is
set). If wanting to start at particular SV, set the start mode to SSV, input the start value, then run. PV1
is the start fore mostly with slope. That is the number 1 segment time can decrease, based on the
slope between the SSV and the number 1 intended segment value.
The program mode operation is carried out from number 1 segment in order. When the end segment
is set, after corresponding segment is executed, it is forced to exit. The exit mode for program
operation can be selected with the RST or the HOLD.
Function
Stop the current segment processing and move onto the next segment.
If in wait/hold status, cancels the corresponding operation, and move one
to the next segment.
Stop the segment processing (time stop) and maintain the current status.
When the program controlled operation starts, the buttons are indicated as the above figure,
and it controls the segment processing for each channel.
3.6 Graph indication and Setup
The graph indicator screen displays the intended value (SV) and measured value (PV) on graph.
The X-axis is the time and the Y-axis is the temperature range.
Press [SETUP] button on the bottom right hand corner on the screen for specific setup of the graph.
هﺮﮐ
ﮓﻧﺎﯿﻧﺎﻫ
تﻻﻮﺼﺤﻣ
یرﺎﺼﺤﻧا
هﺪﻨﯾﺎﻧﻤ
ناﻮﯿﺳ
ﺖﮐﴍ
021-33989001
www.sivancarno.com
021-33989002
