Section 2: Installation
Operator Manual
C4000™
(Rev 1)
© Hantle 2010
2.3
Step 4
Remove the cash cassette from the box (removable cassette dispensers only). Fill
the cassette or cash drawer with the appropriate amount of notes, and carefully
place it in the Cash Dispensing Unit. Place the appropriate denomination label on the
front of the cassette. See page 4.9 for instruction.
Step 5
Before closing the vault, thoroughly test the combination lock by locking and
unlocking the lock several times. It is much easier to diagnose potential lock
problems before shutting the door.
Step 6
Open the top of the ATM. Place the receipt paper in the Receipt Printer. The paper
prints only on one side (shiny side) always check the roll when you install paper.
Place the roll so that the coated side (shiny side) will be facing up. See page 4.12 for
paper loading instruction.
Step 7
Connect the Power cable and the telephone cable to the appropriate outlets on the
wall. Verify that the AC power outlet is grounded. If you are installing the
illuminated topper, make sure to completely install the power cord into the A/C Out
plug on the power supply. The socket takes an extra push to fully seat the plug.
Step 8
Turn the power on and verify that all systems are operational. If any part on the
system or its programming is not operational, an error code will be displayed. If an
error code is displayed, corrective action will be listed below it. If the error cannot
be corrected, please contact your distributor. If no error code is displayed, enter the
Operator Function Menu and view the Error Summary (see programming section).
END
