User Manual 80
the
[10MHz In/Out]
connector of Generator B (set the clock source to "External") and set the
output frequencies of the two instruments as a same value to realize the synchronization
between the two instruments.
Synchronization among multi-instruments:
Divide the 10MHz clock source of a generator (set the clock source to "Internal") into multiple
paths; then, connect them to the
[10MHz In/Out]
connectors of the other generators (set the
clock source to "External) respectively. Finally, set the output frequencies of all the
generators as a same value to realize the synchronization among multi-instruments.
10.5 Print
Users could store the contents displayed on the screen into external USB storage device in "Bmp"
format.
Please connect a USB storage device first. When the connection succeeds, an icon
will be
displayed in the status bar on the screen and the corresponding prompt message will be
displayed. And press
button on the front panel to print or store the screenshot.
10.6 Update
Users could update the firmware.
Press
Utility
->
Update
to enter file browser, and use the knob to select the disk and the firmware.
