background image

 

12

 

4.2 Wireless Setting 

it contains

 Wireless Basic settings, Advance Settings, security, Access Control, WDS 

Settings, Site Survey. 

4.2.1 Wireless Basic settings 

 

Band: 

Indicates the current mode (

2.4GHz(G)

-54Mbps (802.11g

)

2.4GHz(B)

11Mbps (802.11b)). 

2.4GHz(G+B)

, which  allows  both  802.11g  and  802.11b wireless stations to connect to the router. 

Mode: 

Default is 

AP

,you can select 

Client

,

WDS,AP+WDS

 

Network Type: 

Default is Infrastructure,when 

mode

 is 

client,Network Type 

should be setting 

AD-HOC  

SSID:  

Enter  a  value  of  up  to  32  characters.  The  same  name  (SSID)  must  be ssigned to all wireless 

devices in your network. The default SSID is Kingnet, but 

it  is  recommended  strongly  that  you  change  your  networks  name  (SSID)  to  a different  value.  
This  value  is  case-sensitive.  

Channel: 

From 1 to 13.This field determines which operating frequency will be used. It is not 

necessary to change the wireless channel unless you notice interference problems with another nearby 
access point. 

Associated Client: 

click show active client, you can check the list of wireless client. 

Enable MAC Clone: 

it only adapt to wireless client. 

4.2.2 Wireless Advanced Settings 

Summary of Contents for 54M














Reviews: