9
EN
TROUBLESHOOTING
Problem
Device Control
No image on the screen
and no sound from
the speakers
.
• Check that the power cable is connected.(sec.3.2)
• Check that the main switch is on “I”. (sec.3.2)
• Check that the device is not in ST-BY (red led)
Turn on the device using the Power button on the remote control
or key board (sec.4-4.1)
No Image
• Check that the selected input is connected to the source. Press
the Source button on the remote control or change the input (sec.
4-4.1)
The image appears but there is no sound
from the speakers
• Check that the audio wires from the source are connected to the
corresponding input (sec. 3.2).
The TV does not respond to
the remote control
• Point the remote control directly at the sensor.
• Remove any obstacle between the display and the remote
control.
• Check the remote control’s batteries.
• Press the TV button.
Bad reception or interference on the analog
or digital TV channels
• Check that the antenna cable is connected properly.
• Check that the antenna cable is grounded properly.
• Check that there are no other appliances like microwave ovens
that disturb the reception.
The TV does not tune in properly
to the analog channels
• Check that the color system selected in the CHANNEL menu is
“Manual Search” or “Automatic Search “ is correct (sec. 6.7).
• Adjust the fine tuning (sec.6.8).
You do not hear the audio when tuned to an
analog channel
• Check that the color system selected in the CHANNEL menu is
correct (sec.6.7, ex.: BG).
__________________________________________________________________________________________
LCD 32 – 40 TV
