Technical data
Dimensions and mass
Refer to the certified drawing.
Materials of the gear unit
• Gear oil
• Grease
• FKM (a type of fluoroelastomer)
• Copper
• Aluminium
• Polycarbonate (solid)
• Polypropylene (with embedded glass fibre or with carbon)
• Polyamide (solid)
• Polyphenol sulfide (solid)
• For information on the paint and other materials, refer to the drive package
documentation.
Torque seal specification
Parameter
Specification
Torque seal
Loctite 7417 torque Marque or similar
Paint specification
Parameter
Specification
Primer
Two-component, polyamide-cured epoxy pre-
fabrication primer (20µm)
Finish
Two-component, high build, polyamine adduct-
cured epoxy coating (200µm)
Total average minimum dry film thickness
220µm
Corrosion protection by H.I.T.
Parameter
Specification
Inner parts
Rust preventive mineral oil
Breather plug
Present but not sealed
Shaft extensions
Rust preventive grease
Hollow shafts
Anti-oxidising waxy varnish
Unpainted machined surfaces
Anti-oxidising waxy varnish
13
13.1
13.2
13.3
13.4
13.5
Technical data
52
IM_405_002_EN
