Page EN-19
Additional options
Additional options
Adding dishes
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can add more dishes even if the pro-
gramme is already running.
The current programme should only have
been running for a short time, otherwise the
additional dishes will not be cleaned.
1. Press the button (10) to interrupt the
programme.
The colon on the “Wash programme/
remaining time” indicator (19) will stay
illuminated.
2. Open the dishwasher door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
6. Press the button (10) again to continue
the programme run.
A signal tone will sound at regular
intervals while the programme run is
paused.
Changing the programme
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can interrupt an active programme at any
point and start a new programme. But do not
forget to add extra dishwasher detergent if
the programme has already been running
for a longer period and the cover of the dish-
washer detergent dispenser is already open.
1. Press the button (10) to interrupt the
programme.
The colon on the “Wash programme/
remaining time” indicator (19) will stay
illuminated.
2. If required, add extra dishwasher deter-
gent.
3. Simultaneously press the
P
buttons (2)
and (3) until only "
–.––
" appears on the
display.
4. Select the new programme and any other
additional options.
5. Press the button (10).
The newly selected programme starts.
