Page EN-31
Troubleshooting table
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues or
streaks on the dishes.
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose
(see „Adding rinse aid“ on page
EN-11).
There is no dishwasher salt.
Add dishwasher salt (see „Add-
ing dishwasher salt“ on page
EN-10).
The dishwasher salt is clumpy.
Stir the dishwasher salt using
the end of a spoon or similar.
The dishes are not
completely clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes prior to wash-
ing the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see „Loading the
dishwasher“ on page EN-13).
You have selected the incorrect
dishwashing programme.
Select the correct dishwashing
programme (see „Programme
table“ on page EN-16).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dish-
washer detergent (see „Pro-
gramme table“ on page EN-16).
The water pressure is too low.
Turn the water tap on com-
pletely.
The spraying arm can not ro-
tate unhindered.
Ensure that no dishes are im-
peding the motion of the spray-
ing arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Clean-
ing the spraying arm“ on page
EN-22).
