Page EN-12
Dishwasher detergents, rinse aids and dishwasher salts
Amending the rinse aid dosage
If the dishes are
– matt and stained after washing, increase
the dosage by turning the arrow in the rinse
aid compartment (20) onto a higher num-
ber.
– sticky and have streaks, reduce the dos-
age by turning the arrow in the rinse aid
compartment (20) onto a lower number.
Adding dishwasher salt
NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface by using dish-
washer salt in an improper manner.
■
Only use regenerating salt which is
specifi cally intended for dishwashers.
■
Always wipe away split dishwasher
salt immediately with a damp cloth.
■
Immediately after adding the dish-
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher salt
to the dishwasher salt compartment
– if you are exclusively using multitabs which
already contain dishwasher salt,
– the water hardness in your area is in the
0–5° dH range.
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– if the control notification “Add dishwasher
salt” (13) lights up.
(19)
1. Remove the lower dish rack.
2. Turn the cover of the dishwasher salt
compartment (19) in an anti-clockwise di-
rection and remove it.
3. Upon first use: Add 1.5 l water to the
dishwasher salt compartment, so that the
dishwasher salt doesn’t clump.
(d)
4. Place the supplied filling funnel (d) on the
compartment opening.
5. Add dishwasher salt up to the edge of the
compartment.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt
compartment (19) in an anti-clockwise di-
rection until it clicks into place.
8. Replace the lower dish rack (16).
9. Launch a dishwashing programme imme-
diately or carry out a test run immediately
upon first use by (see „Test run“ on page
EN-28).
Summary of Contents for WQP12-7735B
Page 36: ......
