Page EN-27
Installation, connection and initial commissioning
3. Drill the drill holes in the indicated posi-
tions using a (Ø 2 mm) drill bit.
(l)
(h)
(g)
(j)
(g)
(h)
4. Affix both installation hooks (h) with four
screws (l) each onto the front panel.
5. Affix both mounting pegs (g) using the
screws (j) onto the front panel.
6. Hang the front panel on the door of the
dishwasher, hold it in place and open the
door carefully.
(i)
(i)
7. Remove the 4 screws from the inside of
the door. Screw the front panel in place
at these positions using the 4 enclosed
screws (i).
The front panel is then mounted.
Adjusting the opening of the
door
You can adjust how easy or diffi cult it
is to open the dishwasher door. This
setting is often required after the front
panel has been mounted. You can
change the spring force of the door by
turning both lower screws.
To adjust the door
– so that it is easier to open, turn the screws
in an anti-clockwise direction.
– so that it is more difficult to access, turn the
screws in a clockwise direction.
