Page GB-18
Timer function
Setting the cooking time limit
Sensor
Action
Display/
Example
/
Touch the sensor of
the desired cooking
zone/area.
4
(9)
10
Touch.
1 0
(14)
Swipe to set single
minute unit.
1 5
(9)
15
Touch.
1 5
(14)
Swipe to set ten
minute unit.
3 5
(9)
35
Touch.
The countdown
begins.
The cooking zone/
area will switch off
after 35 minutes.
3 5
One dot in the heat
setting display
signals that the
cooking time limit is
active.
4
·
Notes on cooking time limit
– You can set cooking time limits for all cook-
ing zones/areas.
– If a cooking time limit is active for several
cooking zones/areas, the red dot for the
cooking zone/area with the shortest cook-
ing time limit flashes.
– Once the cooking time limit of a cooking
zone/area is reached, this cooking zone/
area switches off automatically.
– If all cooking zones/areas are switched off,
the hob also switches off automatically af-
ter a short time.
Changing the cooking time limit
You can change a pre-set cooking time limit
at any time.
1. Touch the sensor of the cooking zone/
area for which you would like to change
the cooking time limit.
The heat setting display of the selected
cooking zone/area flashes.
2. Touch the timer sensor (9).
The remaining cooking time flashes for a
few seconds. While the display is flashing,
the setting can be changed as described
above.
Removing the cooking time limit
Sensor
Action
Display/
Example
/
Touch the sensor of
the desired cooking
zone/area.
4
·
(9)
26
Touch.
The remaining
cooking time is dis-
played.
2 6
(14)
Swipe left, until “0”
is displayed.
2 0
(9)
20
Touch.
2 0
(14)
Swipe left, until “0”
is displayed.
0 0
(9)
00
Touch.
The cooking time
limit is deactivated.
- -
The dot in the heat
setting display is
gone.
4
