Start-up
Page EN-21
(3)
7. Unscrew both feet (3).
(15)
(16)
8. Loosen both screws (15) on the lower
hinge (16) and remove.
(18)
(17)
(19)
9. With the wrench, loosen the nuts (18),
and remove the pin screw (17). In do-
ing so, ensure you do not lose the snap
ring (19).
(20)
10. Remove the tapping screw (20), and
screw it back in on the opposite side.
(18)
(17)
(19)
11. Reverse the hinge, insert the pin
screw (17) and the snap ring (19)
from the other side, and re-tighten the
nuts (18).
Tip: To tighten the nuts, hold them with
the wrench while tightening the pin
screw from above using the flat-head
screwdriver.
12. Position the hinge on the opposite side
on the corresponding holes in the frame,
and re-attach using both screws (15).
(3)
13. Screw both feet (3) back in. Ensure
that the larger of the two screw-in feet
(shown on left) is on the opposite side to
the hinge.
