Hanseatic HKS12851FB, User Manual

Page: 56 / 64

Setting up and aligning the
appliance
NOTICE
Risk of damage!
Insuffi cient air circulation may lead to
overheating and cause damage to the
appliance.
■
The entire space above the appliance
must remain clear.
■
The appliance should not stand di-
rectly against the wall (leave a mini-
mum clearance of 5 cm).
1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.
(5)
3. Level out any unevenness on the ground
using both of the front screw feet.
– Close the doors.
– Tilt the appliance slightly back and screw
in/unscrew the screw feet (5).
– Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the
doors.
About climate category
• Always ensure the prescribed ambient temperature is maintained (see “Intended use” on
page EN-4).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone description
Code Definition
extended temperate zone SN This refrigerator is designed for use in an ambient tem-
perature of +10 °C to +32 °C.
temperate zone N This refrigerator is designed for use in an ambient tem-
perature of 16 °C to +32 °C.
subtropical zone ST This refrigerator is designed for use in an ambient tem-
perature of +16 °C to +38 °C.
tropical zone T This refrigerator is designed for use in an ambient tem-
perature of +16 °C to +43 °C.
If the room temperature drops significantly below this, the unit will not switch on as often. This
indicates that an unwelcome increase in temperature may occur.
Start-up Page EN-24