page EN-39
Troubleshooting table
Error indicators
Code
Solution
E1
: It takes too long for the water to fill up
or the outlet hose is blocked
Turn the water tap on completely.
Lay out the inlet hose (30) properly and ensure it
is free of kinks (see “Connect the inlet hose” on
page EN-30).
Ensure that the water pressure is correct. See
“Technical specifications” on page EN-43.
Check if the outlet hose (28) is blocked and make
sure that there are no foreign bodies in it.
E3
: The heating element is defective
Have the appliance examined and repaired.
E4
: Water overflow
Switch off the tap. Find the gap in the seal (or
have someone find it) and repair the leak (or have
it repaired).
Ed
: Internal fault
Have the appliance examined and repaired.
Ec
: Fault in the washing control system
Have the appliance examined and repaired.
L4
:
Motor failure
Have the appliance examined and repaired.
C4
: Drain pump failure
Have the appliance examined and repaired.
