Page EN-22 Dishwasher operation
Before getting started
• Read chapter “Safety” from page EN-4, in
particular the safety instructions.
• Set up and connect the appliance as
described in chapter (see “Installation,
connection and initial commissioning” on
page EN-31).
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.“”
Preparation
1. Open the tap completely.
2. Close the appliance door.
3. Press the button (1) to switch the ap-
pliance on.
You will hear a beep and all LEDs will illu-
minate briefly.
After a short time, the programme indica-
tor ECO will light up.
Selecting a dishwashing
programme
It is recommended that you carry out a
test run before the first dishwasher cy-
cle in order to remove residues from
the manufacturing process and in order to
ensure that the appliance functions perfect-
ly. Carry out this test run when the dish-
washer is empty and without any dishwash-
er detergent.
1. Select the suitable dishwashing pro-
gramme based on the “programme table”,
see page EN-20.
(2)
(4)
2. Press the respective programme button
on the programme selection keypad (2)
or on the programme options keypad (4)
to select the desired programme. The
button will start to light up.
3. For the washing programme,
– if you wish to make further adjust-
ments, continue with “Additional op-
tions” on page EN-23.
– if you wish to launch it, continue
with “Starting the dishwashing pro-
gramme” on page EN-24.
Protecting the environment
– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified ca-
pacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see “Loading
the dishwasher” on page EN-16).
– Manual pre-rinsing of the dishes leads
to higher water and energy consumption
and is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
– The appliance features a water tank that
collects dishwashing water from the pre-
vious wash cycle.
– The appliance will automatically pump
the water collected out of the tank after
Dishwasher operation