Page EN-24 Dishwasher operation
(18) (19)
(28)
• Press the button (28) repeatedly until
only the symbol for the spraying arm you
require lights up.
Delayed start
(16)
(27) (26)
The wash cycle normally starts as soon as
you press the button (5).
If you want the cycle to begin later, you can
specify this. The start time can be delayed by
between 1 and 24 hours.
• Press the plus button (26) or minus but-
ton (27) repeatedly until the time indica-
tor (16) shows the desired delay duration
(
H:00
,
H:01
to
H:24
).
Starting the dishwashing
programme
(16)
(5)
1. Start the programme with the but-
ton (5).
If you have not set up a delayed start, the
programme cycle will begin after a few
seconds.
If you have set up a delayed start, the
time indicator (16) on the display (3) will
first show the delay duration; the dots be-
tween the hour and minute numbers will
flash. After the delay duration runs out,
the programme will start.
During the programme cycle, the time in-
dicator will show the time remaining; the
dots between hour and minute numbers
will flash.
At the end of the programme cycle, an
acoustic signal will sound 8 times and the
display will show
End
.
2. Switch the appliance off using the but-
ton (1).
3. Turn the tap off.
4. Wait a little while before unloading the
dishes from the appliance.
Unloading the dishwasher
CAUTION
Risk of scalding!
Hot steam emitted when opening the
appliance door can cause scalding.
■
Maintain a sufficient distance from
the appliance door and do not hold
your head or upper body directly
above the open appliance door.
■
Make sure that children do not open
the appliance door if the programme
has only finished a short time ago.
■
Only open the appliance door slight-
ly to allow the steam to escape more
easily.
■
Allow the dishes to cool before un-
loading the dishwasher.
